你好。
Hello.

在本教程级别中，您将基本了解什么是滑块。
In this tutorial level, learn basically what is a slider.

然后我们已经从数字输入中给出了电机速度，但您也想将您的 HMO 项目放在一个滑块上，有人可以到这里将其滑动到右侧、左侧，然后您可以更改数据。
Then we already give motor speed from the numerical input, but also you want to put your HMO project a slider and somebody can come to here and slide it to the right side, to the left side, and you can change the data.

登记您的兴趣程度。
Register what you're how interested you will say.

滑块，好的，我们点击它。
The slider, OK, let's click it.

让我们将其添加到此处。
Let's add it to here.

然后您可以说这是您的电机速度滑块，并且条形图和 K 在此条件下触发。
And then you can say to this this is your motor speed slider and the bar and the K touch off and on conditions here.

但你也可以从这里定义一个形状，这样你就会看到它们。
But also you can define a shape from the here and like that you will see them.

我们会听到在图书馆听到的内容。
We'll hear what we hear on the library.

你可以像这样选择它，但暂时没关系。
You can select it like that, but doesn't matter for a moment.

刚进入这里，您就会看到我们在这里定义的内容，即 10。
Just into here, you will see what we defined here, the 10.

因此，我将第一件事定义为设备，然后确定，牧场将从零开始，例如，它将达到 50 赫兹。
So I will define as device the first thing and OK, and the ranch will start from the zero and it will go to, for example, 50 hertz.

或者让我们定义80。
Or let's define 80.

好的。
OK.

并向左或向右移动方向。
And moving direction to the right or left.

我们将从左侧开始，左侧为零。
And we will start from the left and left will be zero.

正确的是80。
Right will be 80.

然后是这里的刻度和刻度点和十点。
And then the scale here and the scale points and ten point.

让我们将其规模设置为三，对我来说扩展并触发操作并不重要。
Let's make its scale and the value is three doesn't matter for me an extended and trigger an operation.

我会说“好吧”。
And I will say OK.

一二三四五六七一二三四五、六、七、八、九、十。
One two three four five six seven one two three four five, six, seven, eight and nine and 10.

好的。
OK.

所以它被除以10。
So it is divided by 10.

那么发生了什么事？
So what's happening?

一点一点，从零开始。
One by one, it will start from zero.

已经四点到八点了。
It's four to eight.

我们将从这里看到它，然后我们可以开始模拟。
We will see it from here and we can start a simulated.

这与 Visual Studio 上的癫痫编程类似，我们一直使用滑块，现在使用减号。
This is just like similar with the seizure programming on the Visual Studio already that are we used always the sliders and now the minus.

不，你会看到的。
No, you will see.

最大值为 80，最小值为零。
Maximum is 80 and the minimum is zero.

但在这里我可以看到负100。
But here I can see minus 100.

通常情况下，我的滑块运行正常进入政策项目三十六进入人们的项目，你会看到它现在正在增加。
Normally my slider is running OK into policy project thirty six into people's project, you will see it is incrementing now.

六十二和八十。
Sixty two and 80.

这只是我正在寻找的一点减去百分之一。
This is running just I'm looking one point minus one hundredth.

我们怎样才能？
How can we?

更改。
Change it.

这是。
This is.

我的滑块和我正在听音阶，好吧，这将是 0，这将是 80。
My slider and I'm looking to hear scale, OK, this is going to be zero and this is going to be 80.

在这里我们可以选择颜色。
And here we can select the color.

嗯，就黄色那样，价值小心。
Um, just yellow like that and the value is careful.

我们可以把它的规模做成八。
We can make it scale is an eight.

好吧，我会说，好吧，然后你就会看到它从零开始。
OK, and I will say, OK, then you will see it starting from zero.

我们可以看到数字和比例。
We can see the numbers and a scaled.

但不，我不会。
But no, I'm not going to.

我不会使用它。
I'm not going to use it.

我们只能在这里说一件事。
Just we can say to here just one.

好的，一一进行。
OK, one by one.

好吧，让我们把它变成五，五乘五，我们可以看到。
Okay, just let's make it five and five by five, we can see.

还有 20、40 和 18、60。
And 20, 40 and 18, 60.

这很好。
This is good.

我们能做什么？
And what can we do?

我们已经用这里的比例解决了这个问题。
We already solve it with the scale here.

比例油漆为 10，比例值为 5，但从零开始。
Scale paint is 10 and the scale value is five, but starting from zero.

暂时没关系，只是颜色你可以把它改成蓝色那样，好吗？
It doesn't matter for a moment, just the color you can change it to blue like that, OK?

但这并不重要。
But also this is not important.

重要的是滑块从 0 开始直到 80 或 100。
The important point the slider is starting from zero till 80 or 100.

你在这里定义什么，好吗？
What you define here like that, OK?

据此，您还需要选择比例数据，因为有人可能会说，好吧，这里的上限应该是 100。
And according to that, you need to select also the scale data because somebody can say, OK, the upper limit here should be 100.

然后某人或那个会发生什么。
And what will happen then somebody or the.

工人或员工可以来新买的机器，他可以按到这里，或者她可以按过去写，例如，对于五个这样，你会看到灯光也发生变化，因为这是数据寄存器就是把某人救到稍微右边、左边。
Workers or employees can come to new buy of the machine, and he he can press to here, or she can press through and write, for example, for the five like that and you will see light is also changed because this is the data register is save somebody slightly to the right side, to the left side.

就这样，好吗？
And like that, OK?

这是本教程幻灯片的重点。
This is the important point of the slide for this tutorial.

我到这里就结束了。
I'm finished here.

在下一个教程中再见？
See you in the next tutorial?